How To Clean Carpets Step-by-Step

Cleaning your carpets thoroughly is more than just removing visible dirt. A vacuum cleaner is good for surface cleaning, such as removing large debris and hair. However, a carpet-cleaning machine can clean below the surface and remove hidden contaminants.

Deep cleaning and regular vacuuming can extend the life of your carpet, as well as make it more comfortable and hygienic. Routine carpet care prevents dirt from becoming embedded too deeply in the carpet, reducing wear patterns and keeping odors and deep stains from settling.

This guide will walk you through how to deep-clean your carpets. It includes step-by-step directions and a schedule.

Prepare Carpet Cleaning Before you Begin

Preparation is the key to a successful carpet cleaning. Assess your carpet and gather all your materials before you begin. You can remove stains and dirt from your carpet without damaging it.

Check your carpet type

Identify the materials and stains.

• Wool, nylon and polyester are all materials that can require different cleaning methods or solutions. Different stain types can also require different cleaning formulas and techniques.

Follow the instructions provided by the manufacturer.

• Before cleaning, check the care tag or instructions from the manufacturer. The information could include the carpet’s material composition as well as cleaning guidelines to avoid accidental damage. Water-based cleaners should not be used on certain carpets or rugs.

Gather the necessary supplies

Upright Vacuum

• Vacuuming carpets before and after cleaning is recommended. We recommend the Turbo Lift-Off(r), Vacuum.

Upright Carpet Cleaner

• Deep cleaning of wall-to-wall flooring. The HydroSteam(r), Revolution(r) pet carpet cleaner includes everything you need for deep cleaning your carpets.

Formula

• These solutions, such as the Pro MAX Clean + Protection Upright Carpet Formula clean carpets while preventing future stains.
• Oxygen-based formulas use oxygen-free radicals to decolorize the stain and make it easier to remove. Formulas based on oxygen are the best choice for organic or colored stains such as wine, coffee and juice. Oxy-based formulas are best for pet accidents and stains.

Pre-treatment stain removers

• Before cleaning, you can use a stain-remover to loosen the stain and dissolve it. This will make it easier to clean.
• Stain removers are formulated to match specific stains. Pet PRO OXY stain destroyer works well on tough pet stains such as vomit, urine and mud. It also works great on tough food stains, including tomato sauce, wine and coffee.

How to Clean Carpets Step-by-Step

Cleaning your carpets will improve the look of your home and extend the life expectancy. It also removes dust and dirt allergens. Our experts have outlined the steps to cleaning carpets at home.

Step 1: Move furniture.

Remove all furniture that is easy to lift, like tables and chairs. You may have to clean the carpet beneath heavier items, such as couches or beds. This can be done in stages. First clean one area of the room and then move the heavy furniture.

Step 2: Vacuum debris.

Vacuum the carpet at least once before you deep clean it. Pay special attention to corners and areas with high traffic. Vacuum your carpet at least once prior to deep cleaning it. Our experts recommend vacuuming your carpet once a week for regular maintenance to maintain the fresh look and feel of your carpet.

Step 3: Pretreat problematic areas.

Use a pretreating spray to loosen stains, then use your upright deep-cleaner.

Step 4: Fill your machine with the formula you selected.

Follow the directions on your carpet cleaner or formula bottle. You can add warm, clean water to your carpet cleaner’s fill line, for example. Add formula until you reach the second line.

Step 5: Deep clean your carpets.

You should start cleaning the carpet at the opposite corner of the door to avoid stepping on wet carpet after you are finished.

It is recommended that you clean the same area twice. Move forward while holding the trigger down, and then move backwards without touching the trigger. The first pass sprays the solution into the carpet, while the suction of the second pass removes any moisture. The brush rolls scrub out dirt and stains on both passes.

Pro Tip: We suggest counting two steps for every step. This allows your carpet cleaner to scrub the area and absorb more moisture.

Step 6: Accelerate the carpet drying process.

The drying time depends on the carpet type, thickness, cleaning method, how many times you spray the formula without going over the area, humidity, and air circulation.

After deep cleaning, we recommend waiting four to six hours. However, it may take up 24 hours for the carpet to dry completely.

Try one of these methods if you need your carpets to dry quickly:

• Use the quick-dry mode: Our carpet cleaners such as Revolution(r), HydroSteam(r), Pet deep cleaner have a quick-dry mode that releases less formula, allowing carpets to dry faster.
• Spray the formula and then go over the area: The suction of your carpet cleaner will always be running when it is turned on. Make additional passes (without touching spray trigger) over the carpet to absorb excess moisture.
• Open the windows: By opening the windows, you can help the carpet to dry out by reducing moisture in the air. This method works best when used in conjunction with fans. If it’s humid outside, don’t open your windows. This will slow down the drying process.
• Turn your heating or air conditioning on: Your home’s heating and cooling system can help you dry your carpets faster. It may seem counterintuitive to use your air conditioner, but it will help you dry your carpets. The room can feel stifling due to the moisture in the air when you use your A/C. A fan will also help.

Step 7: Vacuum leftover debris.

After your carpet is fully dried, use your vacuum cleaner to restore the original texture of your carpet.

Step 8: Store your carpet cleaner.

As the last step of your carpet cleaning routine, prepare your reliable carpet cleaners in Auckland to be stored. Regular maintenance can keep your carpet cleaner in top condition, and ready for use the next time.

Store your carpet cleaner properly before storing it.

1. Empty dirty water into a utility sink, and thoroughly rinse it.
2. Remove the plastic brush cover and clean it. Remove any hair or debris that has accumulated in the nozzle using the nozzle cleaning tool.
3. Clean the brush roll chamber. Rinse the brush rolls under running water to remove any debris or hair.
4. Check the steam bar on HydroSteam(r) products. HydroSteam (r) products have a steam bar.
5. Reassemble the machine once all parts and pathways have dried.
6. Be sure to empty, rinse out and dry both the dirty water and clean tank. Store the cord in a dry, protected area.

Conclusion

It is important to clean your carpets regularly in order to maintain a new aesthetic and create a more comfortable, healthy living environment. There are different ways to clean carpets, depending on how the carpet is made and what type of stain it has. Oxygen-based formulas work well for organic stains such as coffee, wine and pet urine. These formulas can be used in an upright cleaner to remove the dirt, dust and debris that are staining your carpet. A proactive approach is the best way to save time and energy, whether you are tackling everyday messes or removing tough stains. A clean carpet can make your home feel inviting and healthy.